Gadgets

Set of 10 RPET coasters.
Material: Bamboo/RPET FeltDimensions: 10,7 x 10,7 x 6 cmWeight: 140 gr
Choice of position and customizable area (mm):Attention: the customization must be selected in the box "product customization"
PRINTING - on the side of the container, 40 x 40 mm

Backpack bag light COB on the front. Lights up in two different modes: steady light, white flashing light red. CELL battery-CR2032.Batteries included. Drawstring closurePrinting technique recommended: silk-screen, transfer
Material: 100% Polyester 300DCertificates: Cadmium, PAHs, RoHS, Battery directive 2006/66/EC, Phtalates, AZO Dyes/Amines, EMC, Formaldehyde, D. or.C EMC/CE, EN 62471:2008 (LVD)Weight: 102 gr
Dimensions (cm): cm 42x35 caCustomizable Area: 22 x 14 cm on the front pocket

Snap Back Black
100% acrylic twill. 6-panel cap with embroidered eyelets, flat visor, reinforced front panel, adhesive on the visor, closure with PVC strap, one size fits all.

Snap Back
100% acrylic twill. 6-panel cap with embroidered eyelets, flat visor, reinforced front panel, adhesive on the visor, closure with PVC strap, one size fits all.

Snap Back Camouflage
100% acrylic twill. 6-panel cap with embroidered eyelets, flat visor, reinforced front panel, adhesive on the visor, closure with PVC strap, one size fits all.

Wireless optical computer mouse in ABS, 2.4Ghza, power saving with hidden nano-receiver, sliding wheel, ABS, batteries included
Size: 11.7 x 5.7 x 2.1 cmMaterial: ABSBatteries: 2 x UM4-AAA-LR03Certificates: PAHs, RoHS, Battery 2006/66/EC, EN 62479:2010, IEC 60950-1, D.o.C. RED, Test Setup & EUT Photographs, RED (Radio Equipment Directive), EMC (EN 301 489-1)
Choice of location and customizable area:
TAMPOGRAFIA - top, 35 x 25 mm

Thermal bag, inside lining in PEVA, short handles, zip closure, in polycanvas 600d
Dimensions: 30.0 x 11.0 x 30.0 cmMaterial: PEVA / Polycanvas 600D / FoamWeight: 181 grCertificates: Cadmium, AZO Dyes/Amines, Formaldehyde, BSCI
Location choice and a customizable area:
Screen printing - front, 10 x 10 cm

Wooden parure, ballpoint pen and mine holders, wooden body, elegant case, blue refill.
Material: Maple / Aluminum / BeechWeight: 116 grCertificates: Cadmium, Nickel, PCP
Size (cm): 17.5 x 4.5 x 2.5 cm
Choice of location and customizable area (mm):
ON CUSTODY:
TAMPOGRAFIA - top, 60 x 30 mm
LASER - top, 60 x 30 mm
ON THE PEN:
TAMPOGRAFIA - near the clip, right or left-handed writing, 50 x 5 mm
LASER - near the clip, right or left-handed writing, 30 x 5 mm
LASER - in line with the clip, 30 x 5 mm

Water bottle in stainless steel, single wall, screw cap.
Material: 201 Stainless SteelDimensions: 6.8 x 26.5 cmCapacity: 650 mlWeight: 192 grCertificates: Cadmium, PAHs, Phtalates, Heavy Metals Migration, SVHC's, BPA, Food Safe, BSCI
Personalization techniques:





Screenmax 100 x 60 mm
Padmax 25 x 55 mm
Laser Engravingmax 15 x 50 mm

Double-walled stainless steel water bottle, screw cap.
STOCK SOLD NEUTRAL, WITHOUT THE POSSIBILITY OF CUSTOMIZATION.
Material: 201 Stainless SteelDimensions: 6.8 x 25.7 cmCapacity: 500mlWeight: 301 grCertificate: Cadmium, PAHs, Phthalates, Heavy Metals Migration, SVHC's, BPA A, Food Safe, BSCI

Double-walled stainless steel water bottle, screw cap, 500 ml capacity. At room temperature it keeps the liquid approximately 6 hours cold and 4 hours warm.
Material: 201 Stainless Steel
Dimensions: 7.1 x 25.7 cmCapacity: 500mlWeight: 321 grCertificate: Cadmium, PAHs, Phthalates, SVHC's, Foodcontact, LFGB, UKCA, BSCI
Choice of position and customizable area (mm):Attention: the customization must be selected in the "product customization" box
360° COLOUR - ALL AROUND: 221 x h50 mm
360° COLOUR - ALL AROUND: 221 x h80 mm
360° COLOUR - ALL AROUND: 221 x h100 mm
WARNING: Specific product for 360° customization.See "related products" for the same model but with classic customization techniques.

Wireless Speaker shower in ABS (2 watt), water proof, equipped with suction cup to place it on smooth surfaces, perfect for answer calls in the handsfree mode or listen to music, lasting battery charge up to 2 hours.
Size: 5.5 x 8.5 cmMaterial: ABSBattery: 1 x UM3-AA-LR6Weight: 140 grCertificates: Cadmium, PAHs, RoHS, MSDS, EMC, EN 62479:2010, IEC 60950-1, IEC 62133, EN 300 328 (RED), D. or.C. RED, Test Setup & EUT Photographs.
Location choice and a customizable area:
PAD printing - front, top, 25 x 7 mm

Water bottle stainless steel double wall, screw cap.
Material: 201 Stainless SteelDimensions: 6.8 x 25,7 cmCapacity: 500 mlWeight: 301 grCertificates: Cadmium, PAHs, Phtalates, Heavy Metals Migration, SVHC's, BPA, Food Safe, BSCI
Personalization techniques:





Screenmax 100 x 60 mm
Padmax 30 x 60 mm
Laser Engravingmax 20 x 60 mm

Classic Apron
65% polyester, 35% cotton. Apron with harness and large front pocket.
190 g/m2
Made in Italy

Gear

100% cotton chino. Front: 98% polyester, 2% elastane. cap, 5 panels with eyelets embroidered, front panel reinforced, visor pre-curved) with six seams, at the time of treatment in polyester, velcro closure strap, one size.Customizable Area: this hat is not customizable on the front.

Packaway Barrel Bag
Tubular duffel bag with double handle
ultra light and waterproof fabric.
Coordinated clutch
tearable label.
Material: Polyester 210DDimensions (cm) : 50 x 30 x 26 cm
Choice of location and customizable area ( mm):
SCREEN PRINTING - front, max 200 x 150 mm

Set of 4 coasters in natural slate, with bamboo support. Packed in an attractive individually designed box with kraft finish.
Material: Bamboo/ SlateDimensions: 11,5 x 5,1 cmWeight: 485 gr
Choice of position and customizable area (mm):Attention: the customization must be selected in the box "product customization"
STREET PRINTING, side of container, 10 x 35 mm

Backpack in 600D polyester and jacquard. Closure with double slider, headphone jack. Padded and adjustable shoulder straps. Pockets side stretch in the mesh network. Front pocket closed by zip.
Size: 30 x 17.5 x 44.5 cmMaterial: 600D Polyester
Customizable Area: on front pocket, 15 x 15 cm